Vescor Catalog > Pump Motor Adapter/Dampening Flanges > Gas Engine Adapters

Vescor® GAS ENGINE ADAPTERS

• Increases Assembly Time - Bolt Mount to Side of Gas Engine
• Are Made of Lightweight but Strong Cast Aluminum
• Proper Shaft Alignment Assured • Reduced Cost - No Need for Foot Brackets, Shims, or Risers
• Provides a Clean, Neat Appearance for Your Finished Product

Note: Not all mounting flanges are available - consult factory

Easy Assembly Pump to Gas Engine

1. Place coupling half for engine on engine shaft and lightly tighten set screw.
2. Mount pump to pump end of gas engine adapter.
3. Place coupling half for pump on pump shaft and lightly tighten set screw.
4. Position coupling insert. Bolt gas engine adapter with pump installed to the face of the gas engine.
5. Adjust coupling thru access opening. Thoroughly tighten set screws and mounting bolts.

ADAPTS TO:

Engines

• Briggs & Straton 3-5 H.P.
• Wisconsin EY18-3W
• Other engines with 1.625 dia. shaft seal pilot

Pumps

• 4F17 4 bolt with 1.781” dia. pilot (6048)
• SAE “AA” 2 bolt with 2” dia. pilot (6049)
• SAE “A” 2 bolt with 31/4” dia. pilot (6061)

Standard Metric Series Pump Flanges also available (Consult factory)

ADAPTS TO:

• Briggs & Straton Engines
• Vanguard 7.5-23 H.P.
• I/C 7-18 H.P.
• Industrial Plus 8-11 H.P.
• Standard Engine 8-11 H.P.
• Other Gas Engines with 5.750” pilot and 5.000” diameter bolt circle

ADAPTS TO:

Engines

• Briggs & Straton 10-18 H.P. Aluminum Engines
• Kohler 6-8 H.P.
• Wisconsin S-8d & TRA-12D
• Other engines with similar mounting

Pumps

• 4F17 4 bolt with 1.781” dia. pilot (6025/6021)
• SAE “AA” 2 bolt with 2” dia. pilot (6023/6020)
• SAE “A” 2 bolt with 31/4” dia. pilot (6024/6019)

Standard Metric Series Pump Flanges also available -Consult factory

ADAPTS TO:

Engines

• Briggs & Straton 10-18 H.P. Aluminum Engines
• Kohler 6-8 H.P.
• Wisconsin S-8d & TRA-12D
• Other engines with similar mounting

Pumps

• 4F17 4 bolt with 1.781” dia. pilot (6025/6021)
• SAE “AA” 2 bolt with 2” dia. pilot (6023/6020)
• SAE “A” 2 bolt with 31/4” dia. pilot (6024/6019)

Standard Metric Series Pump Flanges also available -Consult factory

ADAPTS TO:

• Briggs & Straton Engines
• I/C 9, 10, 15, 18 H.P.
• Other Gas Engines with 6.437” pilot and 5.000” diameter bolt circle

ADAPTS TO

Engines

• Briggs & Straton 6-18 H.P. Aluminum and Cast Iron
• Kohler 6-23 H.P.
• Wisconsin 6-23.8 H.P.
• Other engines with similar mounting

Pumps

• 4F17 4 bolt with 1.781” dia. pilot (6063)
• SAE “AA” 2 bolt with 2” dia. pilot (6064)
• SAE “A” 2 bolt with 31/4” dia. pilot (6067)

Standard Metric Series Pump Flanges also available - Consult factory

ADAPTS TO:

Engines

• Briggs & Straton 6-18 H.P. Aluminum and Cast Iron
• Kohler 6-23 H.P. • Wisconsin 6-23.8 H.P.
• Other engines with similar mounting

Pumps

• 4F17 4 bolt with 1.781” dia. pilot (6022)
• SAE “AA” 2 bolt with 2” dia. pilot (6018)
• SAE “A” 2 bolt with 31/4” dia. pilot (6017)

Standard Metric Series Pump Flanges also available - Consult factory

ADAPTS TO:

Engines

• Briggs & Straton 10-16 H.P. Cast Iron
• Kohler 10-23 H.P.
• Wisconsin TJD and AGND
• Other engines with similar mounting

Pumps

• SAE “A” 2 bolt with 31/4” dia. pilot (196199)
• SAE “B” 2/4 bolt with 4” dia. pilot (196399)
• SAE “C” 2 bolt with 5” dia. pilot (196599)

Standard Metric Series Pump Flanges also available - Consult factory

ADAPTS TO:

Engines

• Wisconsin W4(1770) (2460), AGND, UHLD
• Other engines with similar mounting

Pumps

• SAE “B” 2 bolt with 4” dia. pilot (196299)
• SAE “C” 2 bolt with 5” dia. pilot (196499)

Standard Metric Series Pump Flanges also available - Consult factory

Custom Adapters

Vescor will manufacture Pump Motor / Engine Adapters for Custom Applications

• Steel Adapters
• Special Pump Mounts other than SAE
• Diesel or Gasoline Adapters
• Steel Foot Mounts
• Custom “Face to Face” dimensions

Please consult Vescor for all your Pump Adapter requirements