Return Flanges, Grommets & Risers


	VESCOR Suction Flanges are designed to seal suction lines passing through the top plate of a hydraulic reservoir or similar application VESCOR Suction Flanges also allow access for removal of suction elements for inspection and cleaning Each Suction Flange Assembly Includes: 1. (1) Top plate 2. (1) Internal washer 3. (1) Bottom plate 4. (1) Gasket 5. (4) 5/16-18 thread forming screws

Each Return Flange Assembly Includes:
1. (1) Flange
2. (1) Internal washer
3. (2) 1/4-20 thread forming screws

Return Flanges for Pipe	Return Flanges for Tube

Rubber Grommets
for Reservoir Downpipes

Material Specifications: BUNA-N
1. Drill hole in tank top per cutout size “F”
2. Snap in grommet.
3. Blank size with 'E' hole shall be furnished.

Maximum O.D. limited to 'B' dimension.

Filler Breather Riser

VESCOR® Filler Breather Weld Riser is designed to raise filler breathers 1” above the mounting surface of the reservoir
Eliminate the need to drill and tap tank top. Just weld in place
Prevent contamination from entering reservoir
Round design
Use with VESCOR® bayonet filler breathers

Suction Flange Riser

VESCOR® Suction Flange Risers are designed to raise suction flanges 1” above the mounting surface of the reservoir
Prevents contamination from entering the reservoir
Use with VESCOR® Suction Flanges

Return Flange Riser

VESCOR® Return Flange Risers are designed to raise suction flanges 1” above the mounting surface of the reservoir
Prevents contamination from entering the reservoir
Use with VESCOR® Return Flanges

NOTE: WITH VESCORS' POLICY OF CONSTANTLY IMPROVING ITS PRODUCTS, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.